Call us

Pre-Trip Inspection and DVIR for a Sprinter or Box Truck Over 10,001 lb

9 min read

Once your Sprinter or box truck is a commercial motor vehicle, three inspection duties come with it: check the truck before you drive, keep maintenance records, and pass an inspection at least once every 12 months. The written driver vehicle inspection report (DVIR) is the one people ask about most, and with your own MC and a single truck, the federal DVIR rule does not apply to you, though the check before you drive still does (49 CFR 392.7 and 396.13). The DVIR rule starts the day your company runs a second commercial truck.

This guide covers what each rule asks of a one-truck carrier, what changes when you add a truck or a driver, and what to do with a roadside inspection report. Everything here is the federal rule from 49 CFR parts 392, 393 and 396.

When do the inspection rules apply to your truck?

The federal rules apply to a commercial motor vehicle (CMV) used in interstate commerce (49 CFR 390.3). For a truck carrying freight, CMV means a gross vehicle weight rating, gross combination weight rating or actual weight of 10,001 pounds or more, whichever is greater, or any vehicle carrying hazmat in a quantity that requires placards (49 CFR 390.5).

Whether your truck crosses that line is printed on the manufacturer’s label on your door frame, not decided by the model name. How to read it, and how a trailer or an overloaded van can push you over, is in our guide to the DOT medical card. If your truck is under the line and you never haul placarded hazmat, the federal inspection rules below do not apply, though your state may have its own.

What do you have to check before you drive?

Before driving a CMV, the driver has to be satisfied that these parts are in good working order, and has to use them when needed (49 CFR 392.7):

  • Service brakes, including trailer brake connections if you tow
  • Parking brake
  • Steering mechanism
  • Lighting devices and reflectors
  • Tires
  • Horn
  • Windshield wipers
  • Rear-vision mirrors
  • Coupling devices, if you pull a trailer
  • Wheels and rims
  • Emergency equipment

Emergency equipment has its own rule. A truck that is not hauling placarded hazmat carries a fire extinguisher rated 5 B:C or more, or two rated 4 B:C or more, mounted and readily accessible, with a gauge that shows it is charged. It also carries three reflective warning triangles or at least six fusees (49 CFR 393.95).

The list is the minimum. The driver also has to be satisfied that the vehicle is in safe operating condition overall (49 CFR 396.13), and a vehicle may not be operated in a condition likely to cause an accident or a breakdown (49 CFR 396.7). Anything else that makes the truck unsafe, such as a cargo door that will not latch, falls under these broader rules.

A practical order for a walkaround is the order of the list: start in the cab with the brakes, steering, horn, wipers and mirrors, then walk the outside for lights, tires, wheels and rims, and finish with the extinguisher and triangles. Doing it in the same order each time makes a skipped item easier to notice.

Own your truck and your MC?

StarBriges works with cargo van, Sprinter, box truck and straight truck owner-operators who run under their own authority. Send us your MC and truck details. We’ll review them within one business day.

Apply to run with StarBriges →

Do you need a DVIR if you run one truck?

No. The DVIR rule makes every motor carrier require its drivers to prepare a written report at the end of each day’s work on each vehicle. The same section then says it does not apply to any motor carrier operating only one commercial motor vehicle (49 CFR 396.11(a)(5)). Under your own MC, your company is the motor carrier, so a one-truck operation sits inside that exception.

As the rule is written, the count is of commercial motor vehicles, so a second vehicle that stays under the 10,001 pound line and never hauls placarded hazmat is not one of them.

The exception covers the written report only. The check before you drive under 392.7 and 396.13 still applies on every trip, and so does the maintenance record below.

What records does a one-truck carrier keep?

Every motor carrier has to systematically inspect, repair and maintain the vehicles it controls. For each vehicle it controls for 30 consecutive days, it keeps a record with (49 CFR 396.3):

  • the vehicle’s identification: make, serial number and year, plus the owner’s name if your company does not own it;
  • a way to show what inspections and maintenance are due and when;
  • a record of inspections, repairs and maintenance, with the date and what was done.

Those records stay where the vehicle is housed or maintained for one year, and for six months after the vehicle leaves your control. So even without a DVIR, a defect you find on a pre-trip and fix ends up on paper: the repair goes into this record with its date. A file per truck with its identification, a list of what is due next, and dated invoices for the work done matches the three items above. The rule allows electronic records (49 CFR 390.32).

How does the annual inspection work?

A motor carrier may not use a CMV unless every component listed in appendix A to part 396 passed an inspection at least once in the preceding 12 months, and proof of that inspection is on the vehicle (49 CFR 396.17). The proof can be the inspection report itself or a sticker or decal that shows:

  • the date of the inspection;
  • the name and address of whoever keeps the report;
  • the vehicle’s identification, if the truck is not clearly marked;
  • a certification that the vehicle passed under 396.17.

You can do the inspection yourself only if you meet the inspector qualifications: understanding the part 393 and appendix A criteria, and either a federal or state training program or certificate, or at least a year of training or experience such as work as a mechanic or inspector (49 CFR 396.19). Otherwise a commercial garage, fleet leasing company, truck stop or similar business with qualified inspectors can do it (396.17). A periodic inspection under a state program that meets appendix A also counts, for 12 months from the end of the month it was done (396.17).

The inspector prepares a report, and the carrier keeps the original or a copy for 14 months where the vehicle is housed or maintained, available to any federal, state or local official who asks (49 CFR 396.21).

What do you do with a roadside inspection report?

If an officer inspects your truck and gives you a report, the driver delivers it to the motor carrier (49 CFR 396.9). With your own MC, both are you, so the steps fall on you:

  • examine the report and correct the violations or defects on it;
  • within 15 days of the inspection, certify that every violation has been corrected by signing the carrier portion of the form;
  • if the issuing state agency asks for it, return the completed form to that agency;
  • keep a copy for 12 months at your principal place of business or where the truck is housed.

If the truck was marked out of service, no one may drive it until the repairs listed on the out-of-service notice are done, and the sticker stays on until then (396.9). Keeping your company’s records in order is part of keeping your authority active.

What changes when you add a second truck or driver?

Once your company operates a second CMV, the one-truck exception no longer fits, and 396.11 applies to every CMV you run:

  • The driver reports. At the end of each day’s work, the driver prepares a report for each vehicle driven, identifying the vehicle and listing any defect that would affect safe operation or cause a breakdown, and signs it. No report is required when no defect was found or reported. On a team, one signature is enough if both drivers agree on the defects.
  • The carrier repairs and certifies. Before the vehicle runs again, your company repairs any listed defect likely to affect safe operation, and certifies on the report that it was repaired or that repair is unnecessary.
  • The next driver signs. Before driving, the next driver reviews the last report and signs it to show the certification of repairs is there (49 CFR 396.13).
  • You keep it for three months. The report, the certification of repairs and the driver’s review signature are kept for three months from the date of the report (396.11).

The report can be created and kept electronically (396.11). A hired driver brings other obligations too, starting with the driver qualification file covered in the medical card guide linked above.

Frequently asked questions

Does a cargo van under 10,001 pounds need a DVIR?

Not under the federal rules, as long as it is not hauling placarded hazmat: it is not a CMV, and the inspection rules apply to CMVs in interstate commerce (390.3, 390.5). Check your state’s rules if you run intrastate.

Do I need to fill out a DVIR if nothing is wrong?

No. A driver who has to prepare DVIRs does not have to prepare one when no defect was discovered or reported (396.11). The check before driving still happens.

How long do I keep DVIRs?

Three months from the date of the report, together with the certification of repairs and the next driver’s review (396.11). Annual inspection reports are kept 14 months (396.21), and maintenance records one year (396.3).

Can I keep inspection reports on an app?

Yes. DVIRs and other records the FMCSA rules require you to keep can be electronic, as long as they can be retained, reproduced accurately when requested, and include the required consent (390.32).

Does StarBriges work with Sprinter and box truck drivers?

Yes. StarBriges works with cargo van, Sprinter, box truck and straight truck drivers, and currently partners with active carriers who have both their own truck and MC authority. If your truck is inspected and your paperwork is in order, see how to run with StarBriges.

Keep reading

More owner-operator guides

A box truck owner-operator stands beside his white box truck with a lift-gate at a freight distribution center at dawn, checking a load on his phone.
Amazon Relay vs Running With a Carrier: What Owner-Operators Should Compare

Amazon Relay is Amazon’s freight network, where approved carriers book Amazon loads directly, under their own DOT and MC. Running with a…

Read the guide
Box truck owner-operator shaking hands with a shipping manager at a warehouse loading dock
Box Truck Loads: Where Steady Freight Comes From Besides Load Boards

Box truck loads come from five places: public load boards, brokers who book you directly, carriers that hand you freight from their…

Read the guide
Box truck owner-operator measuring the rear opening of his truck above a lowered liftgate while reading an agreement
Box Truck Owner-Operator Jobs With Your Own MC: What to Check Before You Sign On

A box truck owner-operator job, when you run under your own MC, is an agreement with a carrier to put freight on…

Read the guide
Starbriges owner-operators

Run with steady freight and fast pay.

Tell us what you run and we will match it to freight.

Apply to run with us